Enquiries

Please complete the enquiry form provide below and we’ll contact you shortly

All emails will be dealt with in the strictest confidence and will not be passed onto / or sold to any third party marketing company.

Your Name (required)

Company Name (if applicable)

Contact Telephone Number

Reply Email Address Email (required)

Subject

Your Enquiry

 

Office Location

For Sat Nav, Use Post Code: S81 9LB / GPS Location:

From the North (M18)
  • Leave the M18 at J1 and take the first exit (A631 to Maltby).
  • Follow the main road over a mini roundabout, past a speed camera, and into Maltby until you come to a major cross road with a pub on the opposite corner.
  • Turn right onto the A634 to Oldcotes, and follow the main road across country for about 10 minutes.
  • Soon after entering Oldcotes, turn right at the mini-roundabout (King William pub on the opposite corner).
  • Follow the road out of Oldcotes, through Langold, and Lawn Road is not far past the sign for Costhorpe (a right turn just before a Co-op supermarket).
  • Follow the road round until you find McKenna Precision Castings on the left hand side.

 

From the North (A1M)
  • Leave the A1M at J34, and take the second exit (signposted to Blyth).
  • Follow the main road into Blyth until you come to a staggered crossroads just past the Angel Inn; take the first right turn here.
  • Follow the main road across country for about ten minutes, over a hump back bridge, and past an hotel and a garden centre until you come into Oldcotes.
  • At the mini roundabout (King William pub is on the corner), take a left, follow the road out of Oldcotes, through Langold, and Lawn Road is not far past the sign for Costhorpe (a right turn just before a Co-op supermarket).
  • Follow the road round until you find McKenna Precision Castings on the left hand side.
 

From the South (M1)
  • Exit the M1 at J31 and take the A57 to Worksop.
  • Take the first exit off the round-about onto Todwick Road (B6463), and follow the road straight on until you come to a roundabout, where you will want to take the 3rd exit (B6060).
  • Follow the road round, then make a left turn at Outgang Lane, which is signposted to ‘Rother Valley College’.
  • Go straight over the mini-roundabout and then take the first left, Doe Quarry Lane, which will take you straight past the college.
  • When you come to a crossroads, go straight on and then carry on straight all the way down the country lane. After approx 5 minutes you will find Lawn Road on the left just after a sign for Carlton-in-Lindrick with a ‘30’ speed sign above it.
  • Follow the road round until you find McKenna Precision Castings on the right hand side.
 

Quality Castings Without Compromise

Enquire Here

top